Light Room Safety
1. Policy
"It
is the policy of California State University, Fullerton to
maintain, in so far as can reasonably be expected, an
environment that will not adversely affect the health, safety
and well being of students, employees, visitors, and the
surrounding community."
To achieve this goal, however, we need the help of
every student in the lighting area.
Safety is the concern of everyone!
2. Purpose
We are in a truly dangerous profession and the hazards must be
known in order to be avoided.
The dissemination of this knowledge is a responsibility
shared by all of us, whether faculty, staff, or student .
This knowledge is something we agree to share with each other.
We will teach you safety procedures and other specialized skills that
are necessary to perform your duties here in the Light Room.
In return, you must take responsibility for the continued safe use of
the equipment you will be taught to use.
3. Scope and Application
Anyone and everyone working out of the Light Room, be they faculty, staff,
paid student assistants, or those working in the Light Room as part
of a class
assignment, must adhere to this safety document.
4. Responsibilities
4.1
The Department of Theatre and Dance is responsible for
training you, informing you of safety procedures, and
maintaining an ongoing source of information on safety
procedures.
4.2
The instructors and staff members of the Light Room are
responsible for informing you and training you for your daily
duties in the Light Room, supervising you in your work, and
maintaining safe procedures.
4.3
The Lighting Assistants and students are responsible for
informing supervisors or staff of unsafe conditions, or
violations of the safety guidelines.
4.4 All are responsible for following the guidelines and
protocols contained in this document.
5. Emergencies
5.1
In case of life threatening emergencies or accidents - call
911 immediately.
Do not wait to inform a supervisor.
5.2
Time may be critical.
If you are alone with the individual who has had the
accident--make the call to 911 (from a university phone) or
911 alone if from a pay phone--and call for help if others are
nearby. Detail someone to wait near the street for the
ambulance, to give directions to the ambulance when it
arrives.
5.3 Pay phones are located down the hall from the Little
Theatre in the front lobby. University phones may be found
in the Light Room, Scene Shop Tool Room, Production Office,
and Theatre office, as well as many private offices and the building.
5.4
For non-life threatening emergencies, inform your supervisor immediately,
as well as the Production Manager (Deb Lockwood).
You will have to fill out an accident report.
6. Training Policies
6.1
Anyone working in the lighting area, whether they are Lighting
Assistants, students in one of the lighting classes fulfilling
a course requirement, or theatre department students
fulfilling a 478 requirement, must be fully trained in any job
they undertake, either by the lighting faculty or staff.
6.2
Rather than listing all of the jobs that require training, it
is more appropriate to state those that don't.
There aren't any to list.
Any job that you perform, you must be trained in.
6.3
Training will occur at regular intervals, or as required for
specific tasks.
Training will be performed by the lighting faculty or staff.
7. General Conduct and Regulation
7.1 Running, "horseplay," and fooling around are
never appropriate when working.
7.2 NEVER WORK ALONE! A supervisor must be present.
7.3 NEVER WORK UNDER THE INFLUENCE OF
ANYTHING! (Be
it alcohol, illegal drugs, or even certain prescription drugs.)
If you "feel different" (good or bad), your brain
is being affected, and so is your reaction time, your
judgment,
and your inhibitions. Work time is the time for a CLEAR HEAD.
7.4 Never do anything unless you have been trained. Whether
it is climbing a ladder or using a drill, almost anything
we do is hazardous if performed
without knowledge.
7.5 Regular training sessions are provided by Light Room
staff in the following areas:
7.5.1 Ladders, Scaffolds, and Genie Lift
7.5.2 Little Theatre Grid
7.5.3 Little Theatre Louvres
7.5.4 Counterweight Systems
7.5.5 Power Tools
7.5.6 Hanging or Focusing Lighting Instruments
7.5.7 Use of Lighting Boards
7.5.8 Catwalks
7.5.9 Replacing lamps
7.5.10 Chemical Usage
7.5.11 Electrical Safety
7.5.12 Fire Extinguisher Use
NONE OF THESE JOBS MAY BE PERFORMED WITHOUT A STAFF OR FACULTY
SUPERVISOR PRESENT.
7.6 Ask unauthorized persons to leave the work area. (To
be helpful you can give them directions to their destination
8. Fire Safety
8.1
Location of
extinguishers and fire alarms.
8.1.1 Light Room Area
8.1.1.1 A fire alarm pull box is located in the hallway to
one side of the production office doorway.
8.1.1.2 A fire extinguisher is located in the hallway across
from the men's restroom near the Light Room.
8.1.2 Scene Shop
8.1.3 Little Theatre Stage
8.1.4 Little Theatre Lighting Areas
8.1.4.1 Light Booth
8.1.4.2 Dimmer Room
8.1.4.3 Slot and Beams
8.1.5 Recital Hall and Booth
8.1.6 Area Theatre and Booth
8.1.7 Young Theatre State
8.1.8 Young Theatre Lighting Areas
8.1.8.1 Light Booth
8.1.8.2 Dimmer Room
8.1.8.3 Catwalks
8.1.9 Hallberg Theatre Stage
8.1.10. Hallberg Theatre Lighting Areas
8.1.10.1 Light Booth
8.1.10.2 Dimmer Room
8.1.10.3 Catwalks
8.2 What to do in Case of a Fire
8.2.1 Your first priority
always is to notify the
fire department. Don't assume that the fire can be extinguished
easily, whether by you or others.
8.2.2 Go to the nearest pull box and trigger it. Call 9-1-1.
8.2.3 Inform faculty or staff members that may be present
of the location of the fire, and of your notification of the
fire department.
If you are with others:
8.2.4 Detail someone to pull the alarm.
8.2.5 Evacuate the area.
8.2.6 Notify any faculty or staff members of the location
of the fire, and your notification of the fire department.
Choosing to fight a fire with an extinguisher is a very difficult
decision.
Don't attempt it unless you have been trained in the use
of a fire extinguisher. It is not an easy or simple task to
perform. If there is
any doubt in your mind that you
cannot put out the fire in 20 seconds or less--DO NOT ATTEMPT
IT!
9. Personal Protective Devices--What To Wear
9.1 Proper clothing:
9.1.1 Long sleeved shirt
9.1.2 Long pants
9.1.3 Sturdy rubber soled shoes (no open shoes)
9.2 Special Equipment:
9.2.1 Gloves (for certain tasks-
provide your own)
9.2.2 Safety glasses (will be provided when necessary)
Numbers 1, 2, and 3 should be worn
whenever you report to work.
9.3 Long hair must be tied back or up in a bun.
10. Safety Guards on Equipment
None of the equipment in the Light Room is of types necessary
to have safety guards. For using Scene Shop equipment, see
the Scene Shop Safety Manual. You must be approved to work
in that area.
11. Ladders, Lifts, and Scaffolds
11.1 Ladders
11.1.1 Never use aluminum or metallic ladders when
dealing with electricity.
11.1.2 Never work on ladders by yourself.
11.1.3 Never try to move a ladder while you are on it.
11.1.4 When working on an A frame, always have one or two
persons holding the ladder for support.
11.1.5 Never strain to read something. Straining can spill
you off the ladder.
11.1.6 Always make sure spreader bars are locked on any ladder.
11.1.7 Make certain that all four legs or casters are firmly
planted on the ground, and never set up a ladder on an angled
surface.
11.1.8 Always inform the person atop the rolling A frame before you do
anything-particularly moving!
11.2 Genie Lift
11.2.1 No one may use the lift until they have been
trained and certified by lighting faculty or staff.
11.2.2 Outriggers must
always be used.
11.2.3 Never use the lift by yourself.
11.3 Scaffolds
11.3.1 Never assemble or work on scaffolding by yourself.
11.3.2 No one will use scaffolding until they have been trained
in proper set-up and use by lighting faculty or staff.
11.3.3 When setting up scaffolds make
certain spreader
bars are locked, and scaffold decking (planks) are securely
placed, and that scaffold unit is level.
11.3.4 When working atop the scaffold:
11.3.4.1 Do not lean out over the edge to work.
11.3.4.2 Never pull yourself along by grabbing overhead objects;
this may tip the scaffold over.
11.3.4.3 Never stand while the scaffold is moving.
11.3.4.4 Never work atop the scaffold without a second person
as a counterweight/mover.
11.3.5 When working as a counterweight/mover: Always inform
the person atop the scaffold before you do anything-particularly
moving!
11.4 Upright Scaffolding (Cherry Pickers)
11.4.1 Never use alone.
11.4.2 Always use outriggers; always lock the wheels.
11.4.3 Never use on an un-level surface.
11.4.4 Never attempt to raise or lower the basket
while it is occupied by person or equipment.
11.4.5 When raising or lowering the basket be certain the
rung latches are locked.
11.4.6 No one shall use the upright scaffolding without proper
training and certification by the lighting faculty or staff.
11.5 Training
11.5.1 Training on ladder lift, and scaffolds will
occur as needed. If you need training to perform a specific
task, you must inform the Light Room staff, which will schedule
a training session for you. Training on the upright lift and
upright scaffolding may require demonstration by you to the
lighting faculty or staff that you are properly aware of the
operating methods before you may use them.
12. Electrical Safety
12.1 Extension Cords
12.1.1 MAKE CERTAIN POWER IS
OFF WHEN DEALING
WITH EXTENSION CORDS!
12.1.2 Report, tag, and turn in for repair any cord showing:
12.1.2.1 Excessive wear or damage
12.1.2.2 Cracked or cut casing
12.1.2.3 Evidence of damage to pins - a melted look, or a
blackening of the pins
12.1.2.4 Smaller internal cables showing around the connector
indicating that the casing has pulled loose from the strain
relief in the connector
12.1.3 Cables shall be built in Light Room, or repaired.
Do not attempt either without instruction by Light Room staff.
12.2 Portable Equipment (Dimmers, devices, etc.)
12.2.1 Portable equipment may only be hooked up by faculty
or staff - but you may be called upon to help.
12.3 Grounding
12.3.1 Most of the equipment we use in the Light
Room is grounded - but not all.
12.3.2 When using equipment that is equipped with a grounded
(3 pin) plug. DO NOT bend or break off the grounding pin to
fit it into a 2 pin cable or receptacle - adaptors may be
available for this purpose.
12.3.3 If you should come across a piece of equipment that
has been altered in this fashion, report it to the Lighting
faculty or staff before proceeding.
13. Hazardous Materials
13.1 Hazard Communication Program
13.1.1 You are entitled to be informed of possible hazards
arising from the presence and use of hazardous materials in
the work of the lighting laboratory. For this reason,
standardized material safety data sheets (MSDS) are available
for your use.
13.1.2 You will be informed if any hazardous materials are in
use. A large portion of the work in the lighting area
does not involve the use of hazardous materials. You
cannot be penalized for questioning the safely of any
material.
13.2 Storage and Labeling
13.2.1 All of our hazardous materials are stored in the yellow
flammables cabinet located in the Scenic Lab. All of these items are
labeled with the
original factory label and are never to be rebottled.
13.3 Protective Equipment
13.3.1 For the most part, the only protective gear
required is common-sense.
13.3.2 You will be informed of the need for any protective
device which may be needed.
13.4 MSDS's
13.4.1 MSDS's (Materials Safety Data Sheets) are
on the file for all hazardous materials used in the Light
Room. This file is always available for your perusal, however
it may not be removed from the Light Room except in
cases of emergency.
14. Catwalk Safety
14.1 You must be trained in safe catwalk operating
procedures before you will be allowed to work in the theatre catwalks.
14.2 All tools must be secured to your body to avoid
accidental dropping of tools to the ground below.
14.3 All equipment hung in the catwalks must have a
safety chain attached and secured around the catwalk.
14.4 Unattended equipment must never be placed on the
floor of the catwalks. Anything that could fall to the floor below
must be secured with a safety cable. Place all instruments waiting to
be hung on their sides and safety cable them to the nearest pipe.